VERSAFLOW SERIES SPECIFICATIONS |
Section II: Equipment Specifications
Construction
Overall Dimensions:
- VF-4USP: 64” W x 31” D x 79 ½ ” H
- VF-6USP: 88” W x 31” D x 79 ½ ” H
Work Area Dimensions:
- VF-4USP: 33“W x 27 ½” D x 32” H
- VF-6USP: 49“W x 27 ½” D x 32” H
General Info :
- Designed to fit through standard door openings and elevators.
- All stainless steel construction both inside and out with a pharmaceutical grade finish.
- All viewing panels are stainless steel framed Acrylic.
- Front viewing panel is top hinged and self supporting for easy access to the work area for cleaning and equipment ingress.
- All filter diffuser/guard panels are removable for easy cleaning.
- Straight sides and back maximize work area to accommodate the many types and shapes of pharmacy equipment and automated compounders.
- All corners in work area, antechamber and work surface are easily reached and cleaned.
- 2 position adjustable IV bar.
Antechamber
- Large integrated transfer chamber, located on the left side of unit, protects the work chamber from contamination by continuously bathing the area with HEPA filtered unidirectional laminar air.
Dimensions:
- VF-4USP: 14“W x 27 ½” D x 32” H
- VF-6USP: 22“W x 27 ½” D x 32” H
Waste Removal
- Trash tube is a 4” diameter tube, flanged for waste bag/container connection and provided with an easily removable seal/stopper to maintain work area containment.
- Sharps tube is a 3” diameter tube to facilitate quick drop of the largest syringes and provided with an easily removable seal/stopper to maintain work area containment.
- Fully adjustable Sharps container shelf accommodates most commercially available wide mouth or hinged top sharps collectors.
Safety
- Lock-out handle requiring key for access to work area.
- Digital pressure readout with low pressure alarm for work area.
- Inward/Outward face velocity is 45-55 linear feet per minute at gloveport opening to protect operator/product during massive breach of containment.
- Glove changes can be made without breaking containment.
- Locking casters are standard.
Ergonomics
- Two part sleeve/glove system allows the use of most types and sizes of commercially available gloves for better dexterity and tactility.
- Extra large oval gloveports are placed with bottoms together to provide an anthropometrically correct configuration that accommodates a wide range of body types and increases range of movement.
- Gloveports have a 3” arm rest to reduce operator fatigue.
- Large viewing panel is at an angle to reduce glare and operator strain.
Filtration
- Full framed standard size minipleat HEPA filters 100% of inlet air to both the work area and the antechamber.
- HEPA filters are full coverage and front loading for easy replacement by a certifier.
- A Pre-filter extends the life of the HEPA filter and can be replaced without tools.
Electrical
- High capacity motor/blower systems with speed control to extend HEPA filter’s life.
- Ten foot hospital grade power cord with molded grounded plug.
- Sealed outlet in work area.
- Separate lighted power ON/OFF indicator switches for blower and lighting.
- High efficiency, standard sized fluorescent lights are externally mounted to minimize heat build-up.
- Voltage = 115 Volt, 60 Hz (220/50-60 Hz also available).
- Amperage Rating = 15
- Running Amperage = 6
Weight
- VF-4USP: 456 lbs.
- VF-6USP: 706 lbs.
Section III: Optional Equipment and Accessories
(consult Your SalesPerson For Pricing)
- VF-A80X Ergonomic task chair with anti-bacterial and anti-microbial vinyl covering, various colors.
- VF-A85S Stainless steel cleaning handle with pivot head. Accepts lint-free mop heads (VF-A85M).
- VF-A8EB Electrical Height Adjustment for 4’ Unit (requires additional plug-in).
- VF-A8EC Electrical Height Adjustment for 6’ Unit (requires additional plug-in)VF-A51D.
- Sealed port in side panel for passage of data cables.
All units are made in the USA and available for purchase on the GSA.