Versaflow Series

LFGI Series

VERSAFLOW Series

The Laminar Flow Compounding Aseptic Isolator/Vertical Laminar Flow Workstation (VF) provides the ultimate in product protection. The VersaFlow functions as a Compounding Aseptic Isolator (CAI) while operating under positive pressure to meet USP <797> regulations. The VersaFlow can also be converted to a Vertical Laminar Flow Workstation for use in a cleanroom. HEPA filtered unidirectional (laminar) air bathes the work area and transfer chamber to protect the product from contamination and removes any particulate generated by sample manipulation. The VersaFlow Series of barrier isolators meet or exceed ISO 14644-1 Class 5 air quality. Each VersaFlow, before shipping, undergoes rigorous physical testing to assure the unit meets performance requirements as validated. It is required that independent certification be performed before use.

OVERALL DIMENSIONS:

  • VF-4USP: 64" wide • 31" deep • 79 ½ " high
  • VF-6USP: 88" wide • 31" deep • 79 ½ " high

WORK AREA DIMENSIONS:

  • VF-4USP: 33" wide • 27 ½" deep • 32" high
  • VF-6USP: 49" wide • 27 ½" deep • 32" high

General Info:

  • Designed to fit through standard door openings and elevators.
  • All stainless steel construction both inside and out with a pharmaceutical grade finish.
  • All viewing panels are stainless steel framed Acrylic.
  • Front viewing panel is top hinged and self supporting for easy access to the work area for cleaning and equipment ingress.
  • All filter diffuser/guard panels are removable for easy cleaning.
  • Straight sides and back maximize work area to accommodate the many types and shapes of pharmacy equipment and automated compounders.
  • All corners in work area, antechamber and work surface are easily reached and cleaned.
  • 2 position adjustable IV bar.

ANTECHAMBER:

  • Large integrated transfer chamber, located on the left side of unit, protects the work chamber from contamination by continuously bathing the area with HEPA filtered unidirectional laminar air.

WASTE REMOVAL:

  • Trash tube is a 4"diameter tube, flanged for waste bag/container connection and provided with an easily removable seal/stopper to maintain work area containment.
  • Sharps tube is a 3"diameter tube to facilitate quick drop of the largest syringes and provided with an easily removable seal/stopper to maintain work area containment.
  • Fully adjustable Sharps container shelf accommodates most commercially available wide mouth or hinged top sharps collectors.

SAFETY

  • Lock-out handle requiring key for access to work area.
  • Digital pressure readout with low pressure alarm for work area.
  • Inward/Outward face velocity is 95-100 linear feet per minute at gloveport opening to protect operator/product during massive breach of containment.
  • Glove changes can be made without breaking containment.
  • Locking casters are standard, seismic anchors are available.

ERGONOMICS

  • Two part sleeve/glove system allows the use of most types and sizes of commercially available gloves for better dexterity and tactility.
  • Extra large oval gloveports are placed with bottoms together to provide an anthropometrically correct configuration that accommodates a wide range of body types and increases range of movement.
  • Gloveports have a 3"arm rest to reduce operator fatigue.
  • Large viewing panel is at an angle to reduce glare and operator strain.

FILTRATION

  • Full framed standard size minipleat HEPA filters 100% of inlet air to both the work area and the antechamber.
  • HEPA filters are full coverage and front loading for easy replacement by a certifier.
  • A Pre-filter extends the life of the HEPA filter and can be replaced without tools.

ELECTRICAL

  • High capacity motor/blower systems with speed control to extend HEPA filter's life.
  • Ten foot hospital grade power cord with molded grounded plug.
  • Sealed outlet in work area.
  • Separate lighted power ON/OFF indicator switches for blower and lighting.
  • High efficiency, standard sized fluorescent lights are externally mounted to minimize heat build-up.
  • Voltage = 115 Volt, 60 Hz (220/50-60 Hz also available).
  • Amperage Rating = 15
  • Running Amperage = 6 (LFGI-3 and 4USP) =7(LFGI-6USP)

Weight

  • VF-4USP: 456 lbs.
  • VF-6USP: 706 lbs.

    GRx Rapid Exchange Glove System with deluxe case.

    • GRx Rapid Exchange Glove System

    • GRx Rapid Exchange Glove System Clear Acrylic Economy Case

    • 2' Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30" to 39"

    3' Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30" to 39"

    4' Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30" to 39"

    6' Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30" to 39"

    8' Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30" to 39"

     

    • Seismic Anchors

    • Stopcock for Air, Gas or Vacuum

    • Duplex Electrical Outlet Installed In Work Area Center

    • Additional Pair Smooth Sleeves

    • Replacement GOS for two part glove/sleeve with 4 O-rings

    • Sealed Data Port Passage of 4 cables possible with individual adjustable diameters between 0.16"- 01/27"

    • Ergonomic Task Chair

    Anti-Bacterial, Anti-Microbial Vinyl Covering Available Colors Include:
    Charcoal • Wine • Teal • Navy • Black

VERSAFLOW 4ft, 2 Gloveport

lfgi diagram

VERSAFLOW 6ft, 3 Gloveport

lfgi diagram

VERSAFLOW 6ft, 4 Gloveport

lfgi diagram

4ft, 2 gloveport

LFGI Positive Airflow

Questions about our VERSAFLOW Series?

To find out more about Germfree’s VERSAFLOW Series, contact a consultant by filling out our Contact Us form, or call 1-800-888-5357 (Internationally call +1-386-265-4360).