Radiopharmacy Hood

Lead-shielded Biosafety Cabinet for Compounding Radiopharmaceuticals

Germfree Radiopharmacy Hood PPThe RADIOSAFE Series provides ISO Class 5/Class 100 HEPA filtered unidirectional (laminar) vertical airflow and safely handles potentially hazardous materials. The unit incorporates a 3/4″ lead shield to provide protection while compounding radiopharmaceuticals. The Class II Type A RADIOSAFE Series of Biological Safety Cabinets meets all requirements for USP 797 compliance and is constructed from 100% Stainless Steel. Units are available as Class II Type A or A2.

Performance Data

The Class II, Type A Laminar Flow Biological Safety Cabinet provides protection for the user, product and the environment from particulate and aerosol hazards. The BBF Series of Vertical Laminar Flow Biological Safety Cabinets pass the Biological Tracer Containment Tests of the National Institutes of Health (NIH), the National Cancer Institute (NCI) and the National Sanitation Foundation (NSF). All units are NRTL listed with MET Labs to comply with UL1262.

General Information

Outer cabinet and work surface are welded stainless steel with a pharmaceutical grade finish. Front lifting viewing panel is easily removed and is gasketed to provide a proper seal when in place. Ergonomic front panel is concave permitting operator to lean into work area, reducing strain. High capacity motor/blower system with speed control extends HEPA filter life. Supply and exhaust HEPA filters are parallel to work area and each other to prevent turbulence. Stainless steel fillter screen is removable for easy cleaning. Removable stainless steel work tray facilitates easy clean up and decontamination. Fluorescent lights are externally mounted to minimize heat build-up. The I.V. bar is located in the work area and includes 12 stainless steel hooks.

Filtration

The work area is continuously bathed with positive pressure ISO Class 5/Class 100 HEPA filtered air to protect product from contamination while a negative inward airflow protects the user. Approximately 70% of the air from each cycle is recirculated through the supply HEPA filter while the remaining air is discharged from the hood through the exhaust HEPA filter.

Lead Shielding
  • Lead-lined dose calibrator housing (2″ thick lead)
  • Dose calibrator monitor arm
  • Lead on sides, back and bottom (3/4″ thick)
  • Heavy duty 37″ tall all-welded stainless steel stand
  • Sliding leaded glass shield with 3/4″ lead (13 3/4″ x 20″)
  • Viewing window in shield is 8″x 8″x 4″ with a density of 5.2g/cm3
  • Electrical
  • Separate lighted power ON/OFF indicator switches for blower and lighting
  • Voltage = 115 Volt, 60 Hz (220 V/50-60 Hz also available)
  • Ten foot power cord with a molded grounded plug
  • Amperage rating: 10 amps
  • Product Specifications


    Overall Dimensions:
    5 0″ W X 27″ D X 94″ H

    Work Area Dimensions:
    48″ W X 22″ D X 29″ H

    Weight:
    2700 lbs

    • 220 Volt Upgrade
    • 220voltupgrade

    • Duplex Outlet Installed in the Work Area
    • duplex outlet

    • Exhaust Transition Piece
    • exhaust transition

    • Bin Cart for 12 Trays for Storage Under Workdeck 30″ Wide x 26.5″ D x 29″ H
    • bin_cart_withbins

    • Generator & Storage Cabinet
    • generator-storage

    • Dose Calibrator
    • dose-calibrator

    Radiopharmacy Hood Airflow

    radiopharmacy-hood-airflow-diagram
    Leasing Options: Contact us about leasing USP 797 Compounding Equipment.


    Additional Pharmacy Equipment Information:
    Read more about Germfree's unique Total Customer Care Plan.

    Download Manuals

    Contact Us

    GERMFREE
    Four Sunshine Blvd
    Ormond Beach, Florida 32174
    USA
    +1 386-265-4360
    CONTACT US