The Class II, Type A2 Laminar Flow Biological Safety Cabinet provides protection for the user, product and the environment from particulate and aerosol hazards. These biosafety cabinets eliminate cross-contamination and the accidental release of pathogenic microorganisms or carcinogenic aerosols and drugs to the outside atmosphere. Other applications for these biological safety cabinets include handling materials such as pollen, powders, allergens, dust, and plants.
Our Biological Safety Cabinets are available with all-welded stainless steel stands for operation at a fixed sitting or standing work height. Our 3, 4, and 6-foot units can also be converted into a Class II, Type A2 Biological Safety Cabinet. External exhaust system to vent (duct) the remaining HEPA filtered air to the outside is possible by ordering a thimble transition piece.
Dimensions
General Information
Accessories
Diagrams and Airflow
Overall Dimensions:
BBF-2SSCH Biological Safety Cabinet: 26 ¾” wide ・ 24 ¼” deep ・ 47″ high
BBF-2SSRX Biological Safety Cabinet: 27 ½” wide ・ 24 ½” deep ・ 54″ high
BBF-3SSRX Biological Safety Cabinet: 36 ½” wide ・ 31″ deep ・ 57 ½” high
BBF-4SSRX Biological Safety Cabinet: 48 ½” wide ・ 31″ deep ・ 57 ½” high
BBF-6SSRX Biological Safety Cabinet: 72 ½” wide ・ 31″ deep ・ 57 ½” high
*Light housing and control panel adds an additional 4″ to depth. Depth dimensions include light housing.
Work Area Dimensions:
BBF-2SSCH Biological Safety Cabinet: 24″ wide ・ 17 ½” deep ・ 21″ high
BBF-2SSRX Biological Safety Cabinet: 24″ wide ・ 17 ½” deep ・ 29″ high
BBF-3SSRX Biological Safety Cabinet: 36″ wide ・ 22″ deep ・ 29″ high
BBF-4SSRX Biological Safety Cabinet: 48″ wide ・ 22″ deep ・ 29″ high
BBF-6SSRX Biological Safety Cabinet: 72″ wide ・ 22″ deep ・ 29″ high
Outer cabinet and work surface are welded stainless steel with a #4 pharmaceutical grade finish.
Front lifting viewing panel is easily removed and is gasketed to provide a proper seal when in place.
Ergonomic front panel of the biological safety cabinet is concave permitting operator to lean into work area, enhancing user comfort. (BBF-3′, 4′, and 6′ models only)
High capacity motor/blower system with speed control to extend the life of the HEPA filter.
Supply and exhaust HEPA filters are parallel to work area and each other to prevent turbulence.
Removable stainless steel work tray and tray supports facilitate easy clean up of the biological safety cabinet.
Fluorescent lights are externally mounted to minimize heat build-up.
IV hanging bar with 12 hooks in work area.
Separate lighted power ON/OFF indicator switches for blower and lighting.
Electrical is 115 Volt, 60 Hz (220/50-60 Hz also available)
Ten foot power cord with molded grounded plug.
Constructed to allow for optional outside venting of exhaust air from the biosafety cabinet.
Stainless Steel Stand 30″ or 36″ High in 2′, 3′ and 4′ widths
Welded Square Tube Stainless Steel Stand with Manual Hydraulic Assist 30″ to 39″ High in 2′, 3′ and 4′ widths
Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30″ to 39″ in 2′, 3′ and 4′ widths
Stainless Steel Table – Custom sizes built to your specifications
Bin Cart
Duplex Electrical Outlet Installed In Work Area
Gas shock lift for front viewing panel
Exhaust Transition available for all models of BBF Series Biological Safety Cabinets
Stopcock for Air, Gas or Vacuum
Stand Casters, 2 Locking welded to stand
Sealed Data Port – Passage of 4 cables possible with individual adjustable diameters between 0.16″- 01/27″
BBF Class II BSC Diagrams
BBF-2SSCH:
BBF-2SSRX:
BBF-3SSRX:
BBF-4SSRX:
AIRFLOW PATTERNS FOR BBF CLASS II BIOSAFETY CABINETS
ASK GERMFREE
Creating Environments that Serve Life Science Innovation and Advance Global Health
The Class II, Type A2 Laminar Flow Biological Safety Cabinet provides protection for the user, product and the environment from particulate and aerosol hazards
The BBF Series (Class II, Type A2) of Laminar Flow Biological Safety Cabinet are designed for the safe handling of low to moderate risk agents in laboratories and other settings
