HORIZONTAL LAMINAR FLOW

Horizontal Laminar Flow

BZ SERIES

Germfree’s Horizontal Laminar Flow Cabinets provide a high degree of localized control for critical processes. The laminar airflow principle consists of moving individual streams of unidirectional, ultra-clean air along parallel lines with minimal turbulence.

The BZ Series of Horizontal Laminar Flow Hoods meet or exceed ISO 14644-1, Federal Standard 209E for ISO 5/Class 100 air and IES Recommended Practice for Laminar Flow Clean Air Devices. All units are NRTL listed with MET Labs to comply with UL 1262. Germfree’s Laminar Flow Hoods: Stainless Steel Construction, Ergonomic Design The BZ Laminar Flow Cabinet is constructed of quality all-welded stainless steel with a pharmaceutical grade finish.

Dimensions

Features

Accessories

Diagrams/Airflow

Overall Dimensions:

BZ-3SSRX: 37″ wide ・ 34″ deep ・ 49 1/2″ high

BZ-4SSRX: 49″ wide ・ 34″ deep ・ 49 1/2″ high

BZ-6SSRX: 73″ wide ・ 34″ deep ・ 49 1/2″ high

BZ-8SSRX: 97″ wide ・ 34″ deep ・ 49 1/2″ high

Work Area Dimensions:

BZ-3SSRX: 34″ wide ・ 22″ deep ・ 34″ high

BZ-4SSRX: 46″ wide ・ 22″ deep ・ 34″ high

BZ-6SSRX: 70″ wide ・ 22″ deep ・ 34″ high

BZ-8SSRX: 94″ wide ・ 22″ deep ・ 34″ high

Outer cabinet and work surface are welded stainless steel with a pharmaceutical grade finish.
High capacity motor/blower system with speed control to extend the life of the HEPA filter.
16 gauge stainless steel work deck is 36″ from the floor and reinforced to support 300+ pounds.
Top mounted pre-filters are easily changed.
HEPA filter is full width and height (36″), ensuring unidirectional airflow and is easily changed from both sides.
Top mounted fluorescent lighting is isolated from the clean environment.
IV hanging bar with 12 hooks in work area.
Separate lighted power ON/OFF indicator switches for blower and lighting.
Electrical is 115 Volt, 60 Hz (220/50-60 Hz also available).
Ten foot power cord with molded grounded plug.

Stainless Steel Stand 30″ or 36″ High in 2′, 3′, 4′, and 6′ widths