Vertical Laminar

BVBI Series Laminar Flow
The BVBI Series of Vertical Laminar Flow Hoods provide a high degree of localized control for the handling of materials in an aseptic working environment. The work area is continuously bathed with positive pressure ISO 5/Class 100 vertical laminar flow HEPA filtered air to protect the product from contamination. The BVBI Series of Vertical Laminar Flow Cabinets meet or exceed ISO 14644-1, Federal Standard 209E for ISO 5/Class 100 air and IES Recommended Practice for Laminar Flow Clean Air Devices. The laminar flow principle consists of moving individual streams of unidirectional, ultra-clean air along parallel lines with minimal turbulence. The HEPA filter is positioned above the work area and is protected by a removable, perforated metal diffuser.

Extra Deep Work Area and Product Visibility
Germfree’s BVBI Vertical Laminar Flow Hoods are constructed of quality all-welded stainless steel with a pharmaceutical grade finish. Unlike the Horizontal Laminar Flow Workstations, the BVBI Series provides an extra deep (28½”) work area with filtered air from above. This airflow allows for maximum utilization of the full work area, especially with the use of an automated compounder. Optimum lighting and visibility is achieved with external lighting and acrylic rear and side panels. A SpillGuard feature is utilized in the back of the full-width work area to maintain cleanliness. The customer may choose a 30″ (sitting) or 36″ (standing) height for the integrated stand which also includes locking cleanroom grade casters. For additional information and available options, please refer to the unit specification sheet.

Overall Dimensions:
BVBI-3SSRX: 36 ⅛” wide ・ 38″ deep ・ 76 ¼” high (air duct is removable to reduce depth to 35 1/4″)

BVBI-4SSRX: 49 ¼” wide ・ 38″ deep ・ 76 ¼” high
BVBI-6SSRX: 73″ wide ・ 38″ deep ・ 76 ¼” high
BVBI-8SSRX: 96 ⅞” wide ・ 38″ deep ・ 76 ¼” high

Work Area Dimensions:
BVBI-3SSRX: 33 ⅛” wide ・ 28 ½” deep ・ 30 ¾” high

BVBI-4SSRX: 45 ¼” wide ・ 28 ½” deep ・ 30 ¾” high
BVBI-6SSRX: 69 ¼” wide ・ 28 ½” deep ・ 30 ¾” high
BVBI-8SSRX: 93 ⅛” wide ・ 28 ½” deep ・ 30 ¾” high

BVBI Line- Vertical Laminar Flow Hoods:
Compliant with USP 797 and Validated to CETA CAG-003-2006 Performance Standards

All stainless steel welded construction
16 gauge stainless steel work deck is 36″ from the floor and reinforced to support 300+ pounds
Frame is 1 ½” square stainless steel tubing with legs that terminate with heavy-duty, cleanroom-grade locking casters
Side panels are stainless steel framed ¼” acrylic
High capacity motor/blower system with speed control to extend the life of the HEPA filter
Cleanroom-compatible pre-filter increases the life of the front loading HEPA filter while reducing particulates inside the cleanroom
Filter screen panel is removable for easy cleaning
Front mounted, external fluorescent lighting
6″ demarcation line marked inside work area
1″ stainless steel, adjustable I.V. bar with hooks
Separate lighted power ON/OFF indicator switches for blower and lighting
Electrical is 115 Volt, 60 Hz (220/50-60 Hz also available)
Ten foot power cord with molded grounded plug

Programmable Electrical Stand Height Adjustment

elect panel hydrol

Stainless Steel Table


Bin Cart


Duplex Electrical Outlet Installed In Work Area

duplex outlet

Stopcock for Air, Gas or Vacuum


8″ Deep Perforated Shelf

perforated shelf

Sealed Data Port – Passage of 4 cables possible with individual adjustable diameters between 0.16″- 01/27″

data port

Please contact us for the diagrams of the specific model you are interested in.


The BVBI is Germfree’s advanced line of Vertical Laminar Flow Hoods. These USP 797 compliant units provide a high degree of localized control for critical processes and the handling of sterile products in an aseptic environment

Let's build
your next

It is the dedication of the Germfree team that enables rapid deployment of critical infrastructure both to cutting edge research facilities and the front lines of global health security