Overall Dimensions:
BZ-3SSRX: 37″ wide ・ 34″ deep ・ 49 1/2″ high
BZ-4SSRX: 49″ wide ・ 34″ deep ・ 49 1/2″ high
BZ-6SSRX: 73″ wide ・ 34″ deep ・ 49 1/2″ high
BZ-8SSRX: 97″ wide ・ 34″ deep ・ 49 1/2″ high

Work Area Dimensions:
BZ-3SSRX: 34″ wide ・ 22″ deep ・ 34″ high
BZ-4SSRX: 46″ wide ・ 22″ deep ・ 34″ high
BZ-6SSRX: 70″ wide ・ 22″ deep ・ 34″ high
BZ-8SSRX: 94″ wide ・ 22″ deep ・ 34″ high

• Outer cabinet and work surface are welded stainless steel with a pharmaceutical grade finish.
• High capacity motor/blower system with speed control to extend the life of the HEPA filter.
• 16 gauge stainless steel work deck is 36″ from the floor and reinforced to support 300+ pounds.
• Top mounted pre-filters are easily changed.
• HEPA filter is full width and height (36″), ensuring unidirectional airflow and is easily changed from both sides.
• Top mounted fluorescent lighting is isolated from the clean environment.
  IV hanging bar with 12 hooks in work area.
• Separate lighted power ON/OFF indicator switches for blower and lighting.
• Electrical is 115 Volt, 60 Hz (220/50-60 Hz also available).
• Ten foot power cord with molded grounded plug.
• Optional 316L stainless steel

Germfree manufactures Laminar Flow Hoods for a range of biopharmaceutical applications. Our all-welded stainless steel, horizontal clean air benches provide a high degree of localized control for critical aseptic processes and the handling of sterile products. HEPA-filtered air continuously bathes the work deck removing organisms and particulates 0.3 micron in size with an efficiency of 99.99%. Germfree’s BZ Series of Clean Air Cabinets provide an efficient platform for working in an open, horizontal space.. Germfree's BZ units are constructed of all-welded stainless steel with a pharmaceutical grade finish to ensure durability and ease of cleaning.

Accessories:
BZ Laminar Flow Hoods

• Stainless Steel Stand 30" or 36" High in 2', 3', 4', and 6' widths

• Welded Square Tube Stainless Steel Stand with Manual Hydraulic Assist 30" to 39" High in 2', 3', 4', and 6' widths

• Welded Square Tube Stainless Steel Stand with Electric Hydraulic Height Adjustment 30" to 39" in 2', 3', 4', and 6' widths

• Stainless Steel Table - Custom sizes built to your specifications

• Bin Cart

• Duplex Electrical Outlet Installed In Work Area

• Gas shock lift for front viewing panel

• Stopcock for Air, Gas or Vacuum

• Stand Casters, 2 Locking welded to stand

• Sealed Data Port - Passage of 4 cables possible with individual adjustable diameters between 0.16"- 01/27"

Airflow Patterns for BZ Laminar Flow Hoods 

Laminar Flow Hood Diagrams 

• BZ-3SSRX:

• BZ-4SSRX:

• BZ-6SSRX:

• BZ-8SSRX:

Safety Reminder
Laminar Flow Clean Air Benches are designed to protect the product from airborne particulates in the ambient air. Personnel and the environment are not protected from materials located in the hood. These units should not be used with biohazardous materials, toxins, anticancer agents, radionuclides, or hazardous chemicals. GERMFREE manufactures complete lines of Biological Safety Cabinets, Pharmaceutical Isolators, Fume Capture Systems and other containment equipment to protect personnel and the environment as well as the product.